Camera Accessories

Overview2.2" length 5/8 Baby PinHard-mounts to latest Monitor Mount revisions via M5 thread.Mounts via 5/32 or 4mm Hex Key.3/8 tapped thread for mo...

Overview Replacement MMS 5/16 Tie Down Knob for all of our Monitor Mounts (MMS09, MMS12, MMS11, MMS11-MC).

OverviewGrip Handle to 3/8″ male thread (0.32" male thread length)Female ARRI 3/8" Pin-Loc pattern on end of handle for mounting accessoriesTexture...

OverviewKeepers can be removed for larger mounting surfacesKeepers can be placed on front or back of mounting platformExtra 1/4" mounting holes on ...

OverviewIdeal to clamp to round bars and hold small accessories.Ideal to mount articulating armsComes with 1/4" and 3/8" thread.Max. load up to 4lb...

OverviewThe Whaley Rail II is a collaborative design between Ben Whaley (667 DIT) & Upgrade Innovations. The frame system integrates with the B...

Overview The Arri 3/8″ Pin-Loc 15mm Rod Clamp allows you to add an offset 15mm rod mount to your camera setup via any Arri 3/8″ Pin-Loc mounting pa...

Overview The Arri 3/8″ Pin-Loc Adapter to Arri Rosette Receiver turns any Arri 3/8 Pin-Loc to an Arri rosette receiver with M6 thread. Strong and v...

OverviewThe Arri 3/8″ Pin-Loc 19mm Pivot Clamp allows you to add an offset 19mm rod mount to your camera setup via any Arri 3/8″ Pin-Loc mounting p...

OverviewThe Arri 3/8″ Pin-Loc 15mm Pivot Clamp allows you to add an offset 15mm rod mount to your camera setup via any Arri 3/8″ Pin-Loc mounting p...

OverviewSolid mounts to Preston units via Preston mounting shoe, providing a 15mm spud (2.48" length) for further mounting options..Comes with O-ri...

OverviewComes with O-rings for customizing O-ring grooves. The O-ring selection allows you to control the 15mm clamp device: choose slip, friction ...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewComes with O-rings for customizing O-ring grooves. The O-ring selection allows you to control the 15mm clamp device: choose slip, friction ...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewCombination of 1/4-20″ and 3/8-16″ threads allow you to change thread size quickly.Cross holes help wrench the pins into place with a stand...

OverviewCombination of 1/4-20″ and 3/8-16″ threads allow you to change thread size quickly.Cross holes help wrench the pins into place with a stand...

OverviewCombination of 1/4-20″ and 3/8-16″ threads allow you to change thread size quickly.Cross holes help wrench the pins into place with a stand...

OverviewCombination of 1/4-20″ and 3/8-16″ threads allow you to change thread size quickly.Cross holes help wrench the pins into place with a stand...

OverviewFemale 3/8 Thread on both ends.Loose 3/8 Set Screw provided. Set in place with Loctite to have a male 3/8 thread.Cross holes help wrench th...

Overview Add an additional Horizontal Rail to your Whaley Rail system (no clamps included).

OverviewFemale 3/8 Thread on both ends.Loose 3/8 Set Screw provided. Set in place with Loctite to have a male 3/8 thread.Cross holes help wrench th...