Flowcine

The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible ...

The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible ...

The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible ...

The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set. The main functions for t...

The top frame is where you’d normally attach your gimbal. It can work without the bottom frame, if you plan to dock it in the GLINK Docking Statio...

The full ring is a kit with both the top and bottom frame. Height: 640 mm Width: 480 mm Depth: 30 mm Weight: 690 g

The bottom frame is needed if you’d like to work without the GLINK Docking Station, or if you need to mount your gimbal over slung. Height: 240 ...

The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greates...

The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greates...

The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greates...

The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greates...

Gimbal Part for G-Link 

STANDARD OR COMPLETEThe Black Arm comes in two versions. The Black Arm Standard is made to work for gimbals and cameras with a weight range between...

The  Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases cou...

The Black Pro Clamp Single mounts on to standard pipes/speed rail with 48-51mm diameter. It’s specified up to 500kg load and are German TUV certifi...

The Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certifie...

The Black Mitchell plate is the connecting plate between the Tranquilizer/Wire AVM and your Female Mitchell mount or gimbal/Remote head.

The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mo...

The xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the force between the upper, middle ...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

This is the complete kit of the: Arm posts Low mode grip handle Super-high/low mode link bracket The kit allows you to configure your rig in super ...

This is the complete kit of the: Arm posts Low mode grip handle Super-high/low mode link bracket The kit allows you to configure your rig in super ...