Camera Stabilization

The Female Mitchell mount attaches right on to the Mitchell plate of the Black arm. It allows mounting of any standard Male Mitchell mount attache...

The GLINK MoVI R2 Mount is made to allow you to fine tune the balance around tilt on your gimbal unit. The mount comes with a GLINK dovetail that a...

Vertical stabilization for your Easyrig. The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig (2/2.5/3 or Va...

The Serene Bungee grip is a small hook that holds the bungee cord in place.It’s placed on ONE side of the Serene arm, where the bungee cord is atta...

MAXIMIZE YOUR REACHThe Serene Extension arm is an additional arm that the user can quickly and easily mount on their current Serene to extend the l...

FOR THE VERY HEAVY SETUPSThe Serene Tough bands are for everyone that shoots on a very heavy setup. When you have maxed out your heaviest Serene sp...

The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity, and when being...

The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity, and when being...

The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity, and when being...

The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity, and when being...

The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity, and when being...

The Black T-nut is a clever M12x1.75 nut that you can tighten either by hand or with a 19mm wrench. Of course it fits our Black Single clamps, but ...

The Black T-nut is a clever M12x1.75 nut that you can tighten either by hand or with a 19mm wrench. Of course it fits our Black Single clamps, but ...

The xSPINE tool clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF bars. The tool clip-on allows two allen keys or t...

TRANQUILIZER – QUICK INFOThe Flowcine Tranquilizer has been carefully built from ground up to meet the following criterias: Small in size Stabilize...

The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer...

The Universal Rack clamps on to the tow bar of your car. It allows two Pro Clamp singles  to be attached for further mounting of standard 48-51mm t...

The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″. The xDROP, is a new male socket block-to-...

The xADJUST are a nicer and easier to use version of the standard front/back mount socket block screws. It ships in one of two set-ups:XADJUST FRON...

The xADJUST are a nicer and easier to use version of the standard front/back mount socket block screws. It ships in one of two set-ups:XADJUST FRON...

INTRODUCING THE XARM Smoothest double articulated stabilization arm on the market. Frictionless and noiseless design. Smooth start/stops at max boo...

The xARM Waterproof cover, is our thinnest and softest cover for the xARM. Its inner fleece material keeps the xARM intact from anything that might...

The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and ...