Products

OverviewTighten and loosen baby pin using a 5/32 or 4mm Hex key.Solidly built with Anodized Aircraft Aluminum.

OverviewUses M6 boltWashers are provided for bolt length adjustment, allowing for maximum thread engagementRosettes are clocked and doweled for sup...

DescriptionHow many hours have you had to stand at your camera wishing that you could just move the viewfinder on your camera out and up just a bit...

OverviewIdeal to clamp to round bars and hold small accessories.Ideal to mount articulating armsComes with 1/4" and 3/8" thread.Max. load up to 4lb...

Description Replacement MMS 5/16 Tie Down Knob for all of Upgrade Innovations' Monitor Mounts (MMS09, MMS12, MMS11, MMS11-MC).

DescriptionThe Offset 15mm Rod Clamp can clamp two 15mm rods at either 1" or 2" spacing.Adjustable Levers and Socket Cap Screws are provided for ei...

Description The 15mm Rod Clamp – 1/4-20 mounts to any 1/4″-20 thread. Mounting is easy with Upgrade Innovation's high quality wing knobs and the re...

Overview The adapter set allows you take any standard VESA plate and expand it to either 200mm x 100mm or 200mm x 200mm. This set will go with any ...

DescriptionFemale 3/8 Thread on both ends.Loose 3/8 Set Screw provided. Set in place with Loctite to have a male 3/8 thread.Cross holes help wrench...

cDescription Female 3/8 Thread on both ends. Loose 3/8 Set Screw provided. Set in place with Loctite to have a male 3/8 thread. Cross holes help wr...

DescriptionFemale 3/8 Thread on both ends.Loose 3/8 Set Screw provided. Set in place with Loctite to have a male 3/8 thread.Cross holes help wrench...

OverviewKeepers can be removed for larger mounting surfacesKeepers can be placed on front or back of mounting platformExtra 1/4" mounting holes on ...

Description The Cine Mounting Plate is perfect for when you need to solid mount a camera, small monitor or accessory. Removable rubber keepers, a b...

Overview The Single 8″ Rudy Arm – Universal 1/4-20 & 3/8-16 is designed for universal use with industry standard 1/4-20 and 3/8-16 mounting opt...

Overview The Double 6″ Rudy Arm – Universal 1/4-20 & 3/8-16 is designed for universal use with industry standard 1/4-20 and 3/8-16 mounting opt...

OverviewThe MMS09 VESA Monitor Mount to 5/8″ Spigot – Ball-Loc – Standard supports broadcast & production quality monitors up to 77 lb/35kg, de...

OverviewThe MMS11 VESA Monitor Mount to 5/8″ Spigot – Twin Friction-Loc – Standard supports broadcast & production quality monitors up to 40 lb...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system.The high quality adjustabl...

OverviewThe Pivot Clamp is perfect for the grip and prop department where you need to quickly assemble a 15mm rod system. They can be used in combi...

OverviewThe MMS12 VESA Monitor Mount to 5/8″ Spigot – Friction-Loc – Standard supports broadcast & production quality monitors up to 45 lb/20kg...

OverviewExtra thumbscrews for your Standard VESA or Landscape/Portrait VESA Plate monitor plate.Only compatible with UI's VESA Standard Monitor Pla...

OverviewThe Arri 3/8″ Pin-Loc 15mm Pivot Clamp allows you to add an offset 15mm rod mount to your camera setup via any Arri 3/8″ Pin-Loc mounting p...