Products

DESCRIPTIONOriginal 90° LEMO cable to connect a Tentacle SYNC E and ORIGINAL timecode generator to an ALEXA Mini camera. LEMO Anglissimo™ connector...

DESCRIPTIONYou need this straight BNC cable if you want to connect a Tentacle Timecode Generator SYNC E or ORIGINAL to devices that accept and send...

DescriptionAdapter cable to feed timecode from any Tentacle SYNC E, ORIGINAL, TRACK E or TIMEBAR to devices with a DIN 1.0/2.3 input like the Canon...

DESCRIPTIONMultipurpose 3.5 mm mini jack (3-pin) cable. Use this cable to sync two Tentacle Sync devices with each other or connect your Tentacle S...

DESCRIPTIONAdapter cable to feed timecode from any Tentacle SYNC E or ORIGINAL to RED KOMODO and V-RAPTOR cameras via the 9-pin EXT connector.Featu...

DESCRIPTIONSpecial cable to feed timecode from any Tentacle Sync timecode generator SYNC E and ORIGINAL to all RED cameras with 4-pin LEMO sync por...

DescriptionAdapter cable to feed timecode from any Tentacle SYNC E or ORIGINAL Timecode Generator, TRACK E Timecode Audio Recorder or TIMEBAR to a ...

DescriptionThe TIMEBAR is the all-rounder among timecode displays, combining multi-functionality with a high-contrast display. Equipped with OLED t...

DescriptionThe TIMEBAR Timecode Slate is the all-in-one digital timecode slate kit, designed for seamless integration with the entire Tentacle Sync...

DESCRIPTIONThe TRACK E Timecode Audio Recorder can easily fit in your pocket for recording on the go. This allows mobile operation for example as a...

DESCRIPTIONThe TRACK E Timecode Audio Recorder can easily fit in your pocket for recording on the go. This allows mobile operation for example as a...

DESCRIPTION25 pieces of additional velcro loop pads for any Tentacle Sync timecode generator. 25 x Velcro loop pads 4cm x 2,5cm

Description This new Tentacle to USB-C Audio Interface timecode cable enables seamless synchronization with devices like the DJI Osmo Action, DJI P...

Description Panavision, Canon, etc Precision CNC hobbed gear for MK3.0 and MK3.1 Motor.

DescriptionDouble Thick 12mmPrecision CNC hobbed wide gear for MK3.0 and MK3.1 Motor. 

DescriptionThis power cable can be used to power transmitter or receiver from any 2-pin Connector power source. Please note the 2-pin Connector has...

DescriptionThis power cable can be used to power transmitter or receiver from any 2-pin Connector power source. 2-Pin Connector to 2-Pin Connector ...

Description 30 Watt AC Power Adapter

Description P-Tap (D-Tap) 2-pin connector

Description2-Pin Locking Connector to Power Tap / D-Tap.  

DescriptionThis Antenna replaces those used on the CTRL.5 and MDR.S. Note: When using CTRL.5 in 5GHz Wifi Frequencies (and not 2.4 GHz), it is reco...

Description1 Pair of Dual-Band Antennas for use with 2.4/5GHz Wifi devices.Not compatible with Bolt or other zero-delay wireless video solutions. S...

Description This 24 inch / 60 cm 5-Pin USB (Straight) to 5-Pin USB (Right Angle) cable enables the following workflows:Node ModemConnect your Node ...

DescriptionMeant for Bolt 4K or Bolt 6 and to be used with V antennas.These are designed special horizontally polarized antennas for use with the V...