Products

For the larger frame gimbals, you may need to extend the Black a little bit.  Front extension blocks come in three lengths, 100mm, 180mm and 300mm....

For the larger frame gimbals, you may need to extend the Black a little bit.  Front extension blocks come in three lengths, 100mm, 180mm and 300mm....

The 45mm Extension rods attaches to the standard rods on your Tranquilizer/Wire AVM, giving some extra space above or below the vibration mount.Shi...

The Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you ha...

The Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you hav...

The Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you hav...

The Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you hav...

The Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you hav...

This is the complete kit of the: Arm posts Low mode grip handle Super-high/low mode link bracket The kit allows you to configure your rig in super ...

This is the complete kit of the: Arm posts Low mode grip handle Super-high/low mode link bracket The kit allows you to configure your rig in super ...

This is the complete kit of the: Arm posts Low mode grip handle Super-high/low mode link bracket The kit allows you to configure your rig in super ...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two di...

The xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the force between the upper, middle ...

INTRODUCING THE BLACK ARMThe Black Arm is a hard-mount three-axis stabilizing system made for a variety of camera gimbals. The damping action of al...

The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mo...

The Black Mitchell plate is the connecting plate between the Tranquilizer/Wire AVM and your Female Mitchell mount or gimbal/Remote head.

The Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certifie...

The Black Pro Clamp Single mounts on to standard pipes/speed rail with 48-51mm diameter. It’s specified up to 500kg load and are German TUV certifi...

The  Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases cou...

STANDARD OR COMPLETEThe Black Arm comes in two versions. The Black Arm Standard is made to work for gimbals and cameras with a weight range between...

Gimbal Part for G-Link