Products

Description The Kickstand for CTRL.5 was designed to allow your CTRL.5 to sit upright on any surface when not in use. This symmetrical in design pl...

DescriptionLink AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX...

DescriptionLink AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX...

Overview LP-E6 compatible battery to power Teradek RT Controllers. 2000mAh size will power transmitter for approximately 2-3 hours. 7.4VIn the Box:...

Description For MDR. Spare Motor cable, 30cm. Note - this also works with the Receiver MK3.1, but the right angle points DOWN towards the CAM/PWR s...

DescriptionMotor Cable - 4-pin to 4-pin Straight angle on both endsUltra flexible cable exits downwards from MOTR.S, MOTR.S MAX, and MOTOR.X for ea...

DescriptionSlimline connection into an MK3.1 and MOTR.S Motor. Ultra flexible cable exits upwards from Motor (vertical) for easy routing back to th...

Description MOTR.S and MOTR.S MAX features a unique quick-release gear. This gear can be optionally secured with the MOTR.S and MOTR.S MAX Gear loc...

DescriptionThis 12 inch / 30 cm 5-Pin to USB-A cable supports various workflows:SmallHD Overlays with CTRL.5 Connect your CTRL.5 to any SmallHD 4K ...

DescriptionPre-marked focus rings work with the Teradek RT's Lens Mapping features on compatible Controllers. Lens mapping allows for auto-calibrat...

Description Experience uncompromising wireless performance with Ranger, the only solution with true zero-delay (<1ms) transmission, visually los...

DescriptionSold individuallyMeant for Bolt 4K and to be used in with V antennas.These are designed special horizontally polarized antennas for use ...

DescriptionThese 5dBi antennas cover 5GHz frequencies. They can replace antennas used on Bolt 2000/3000 XT.  These antennas are NOT compatible with...

DescriptionThese 2dBi antennas cover 2.4 and 5GHz frequencies. They can replace antennas used in the following Teradek products: Serv 4K Serv Micro...

Description The Teradek RP-SMA Female to RP-SMA Female Cable features an RP-SMA type female connectors on both ends. Cable length is 4in/10cm.In th...

Description This Motor Gear are designed for use with the Teradek RT series MOTR.S/MAX lens control motor. The wide surface area provides a larger ...

Power cable for MDR.S. 3-pin Connector to 3-pin Connector. The RT 3 Pin PWR & R/S 0.4m includes an Arri Run/Stop trigger.

Power cable for MDR.S. 3-pin Connector to 2-pin Locking Connector.

Description Power cable for MDR.S. 3-pin Connector to P-Tap Connector.

DescriptionThis 12 inch / 30 cm 5-Pin to USB-A cable supports:SmallHD Overlays with CTRL.5 Connect your CTRL.5 to any SmallHD 4K Production Monitor...

This 5-Pin Straight Angle USB to 5-Pin Right Angle USB 12 inch / 30 cm Cable enables the following workflows: Connect your Node Modem (Node 5G, No...

Overview Replacement/spare bushing for the Motor bracket (11-1434) that Fits 19mm and 15mm rods.

Description The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosy...