{"title":"Camera Stabilization","description":"","products":[{"product_id":"flowcine-black-arm-complete","title":"Flowcine Black Arm Complete","description":"\u003ch4\u003eINTRODUCING THE BLACK ARM\u003c\/h4\u003e\u003cp\u003eThe Black Arm is a hard-mount three-axis stabilizing system made for a variety of camera gimbals. \u003c\/p\u003e\u003cp\u003eThe damping action of all axes; vertical, tilt and roll are created by custom-made actuator hydraulic dampers that are fully adjustable. The Black Arm Complete kit comes with an additional anti-vibration camera gimbal mount to absorb high-frequency fluctuations from road noise and engine hum.\u003c\/p\u003e\u003cp\u003eThe Black Arm is the film industry’s standard for camera vehicle mounts. Purely mechanical – the Black Arm is easy to use and maintain. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.\u003c\/p\u003e\u003cp\u003eYou can mount the Black Arm on a multitude of transporters and vehicles such as; dollys, cars, ATVs, boats, motorbikes, scooters, snowmobiles etc.\u003c\/p\u003e\u003cp\u003eThe Black Complete has a vast payload weight range; between 5-32 kg (11-70.5lbs). It ships with two sets of springs (7.0 \u0026amp; 7.5), and two sets of dampeners for each damper position (a total of 6 dampeners).\u003c\/p\u003e\u003cp\u003eA 22-step knob enables you to precisely dial in the amount of damping you need for your shot.\u003c\/p\u003e\u003ch4\u003eSTANDARD OR COMPLETE\u003c\/h4\u003e\u003cp\u003eThe Black Arm comes in two versions. The Black Arm Standard is made to work for gimbals and cameras with a weight range between 5-13kg (11-28lbs). The Black Arm Complete is for users working with higher loads and carries between 5-32kg (11-70lbs). Of course, you have the option to upgrade the Standard version into a Complete, if desired.\u003c\/p\u003e\u003cp\u003eThe Black Standard ships with one damper for each of the three axes, while the Black Complete ships with a total of six dampers, allowing for dual dampers on each axis if needed, or as spares.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456002928698,"sku":"Blk-Cmpl","price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/5d460b24256372fda45e84a71657e706.jpg?v=1734035529"},{"product_id":"flowcine-glink-spring-core-blue-pair-strong","title":"Flowcine - GLINK Spring core - Blue (pair) Strong","description":"\u003cp\u003e\nThe GLINK Spring cores are based on the same type of polymer spring technology Flowcine developed for the xARM. The polymer spring cores are made with an outer shell of Neoprene and each core has a smooth and linear lifting capacity. When being used near their maximum lifting capacity, they perform their best, thus each set of spring cores has a weight range of about 5 Kg \/ 11 Lbs, allowing the gimbal operator to fine tune the arm to optimal performance. The spring cores are pre-extended and can quickly be changed on set. The GLINK Spring cores, when tuned correctly, are incredibly smooth and need just a minimal force to maintain any position.\n\n\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456558968890,"sku":"g-Spring-Blue","price":389.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/8b1a6cac50f820298bc137f48d33dc10.jpg?v=1714761310"},{"product_id":"flowcine-100mm-front-extension-block","title":"Flowcine 100mm Front Extension Block","description":"\u003cp\u003eFor the larger frame gimbals, you may need to extend the Black a little bit.  Front extension blocks come in three lengths, 100mm, 180mm and 300mm.\u003c\/p\u003e\u003cp\u003eCommon use cases for the different lengths would be the 100mm block for the DJI Ronin 2, the 180mm block for the Shotover G1 and the 300mm block for the Freefly MoVI XL.\u003c\/p\u003e\u003cp\u003eThe extra length of the arm adds leverage, due to this we recommend a lower max load for the arm. See the table for the recommended max loads for each block.\u003c\/p\u003e\u003cp\u003eNote: The Extension blocks should always be used with the External rubber stoppers, which makes sure the Black operates within the desired angles and don’t hit it’s end points. With the extra leverage on the arm it’s important to keep things safe and be extra careful when operating. The external rubber stoppers are included in the current Black arm kit, but if you have an older unit you may have to add the stoppers to your order.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eRECOMMENDED MAX LOADS:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eBleow are the recommended max loads (including vibration mount) for the Black, when used with the different Front extension blocks:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100mm Front extension – 28kg\u003c\/li\u003e\n\u003cli\u003e180mm Front extension – 26kg\u003c\/li\u003e\n\u003cli\u003e300mm Front extension – 24kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559165498,"sku":"Blk-Front-Ext-100","price":169.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/58eff5a2088f31bdd95fce77b69c0478.jpg?v=1714761313"},{"product_id":"flowcine-180mm-front-extension-block","title":"Flowcine 180mm Front Extension Block","description":"\u003cp\u003eFor the larger frame gimbals, you may need to extend the Black a little bit.  Front extension blocks come in three lengths, 100mm, 180mm and 300mm.\u003c\/p\u003e\u003cp\u003eCommon use cases for the different lengths would be the 100mm block for the DJI Ronin 2, the 180mm block for the Shotover G1 and the 300mm block for the Freefly MoVI XL.\u003c\/p\u003e\u003cp\u003eThe extra length of the arm adds leverage, due to this we recommend a lower max load for the arm. See the table for the recommended max loads for each block.\u003c\/p\u003e\u003cp\u003eNote: The Extension blocks should always be used with the External rubber stoppers, which makes sure the Black operates within the desired angles and don’t hit it’s end points. With the extra leverage on the arm it’s important to keep things safe and be extra careful when operating. The external rubber stoppers are included in the current Black arm kit, but if you have an older unit you may have to add the stoppers to your order.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eRECOMMENDED MAX LOADS:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eBleow are the recommended max loads (including vibration mount) for the Black, when used with the different Front extension blocks:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100mm Front extension – 28kg\u003c\/li\u003e\n\u003cli\u003e180mm Front extension – 26kg\u003c\/li\u003e\n\u003cli\u003e300mm Front extension – 24kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559198266,"sku":"Blk-Front-Ext-180","price":349.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/58eff5a2088f31bdd95fce77b69c0478_66120ff6-6761-451a-b7d6-ed0bd3090834.jpg?v=1714761315"},{"product_id":"flowcine-300mm-front-extension-block","title":"Flowcine 300mm Front Extension Block","description":"\u003cp\u003eFor the larger frame gimbals, you may need to extend the Black a little bit.  Front extension blocks come in three lengths, 100mm, 180mm and 300mm.\u003c\/p\u003e\u003cp\u003eCommon use cases for the different lengths would be the 100mm block for the DJI Ronin 2, the 180mm block for the Shotover G1 and the 300mm block for the Freefly MoVI XL.\u003c\/p\u003e\u003cp\u003eThe extra length of the arm adds leverage, due to this we recommend a lower max load for the arm. See the table for the recommended max loads for each block.\u003c\/p\u003e\u003cp\u003eNote: The Extension blocks should always be used with the External rubber stoppers, which makes sure the Black operates within the desired angles and don’t hit it’s end points. With the extra leverage on the arm it’s important to keep things safe and be extra careful when operating. The external rubber stoppers are included in the current Black arm kit, but if you have an older unit you may have to add the stoppers to your order.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eRECOMMENDED MAX LOADS:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eBleow are the recommended max loads (including vibration mount) for the Black, when used with the different Front extension blocks:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100mm Front extension – 28kg\u003c\/li\u003e\n\u003cli\u003e180mm Front extension – 26kg\u003c\/li\u003e\n\u003cli\u003e300mm Front extension – 24kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559231034,"sku":"Blk-Front-Ext-300","price":369.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/58eff5a2088f31bdd95fce77b69c0478_a7945272-4f27-47ee-bc35-d4644de8b4c4.jpg?v=1714761318"},{"product_id":"flowcine-45mm-rod-extension-kit","title":"Flowcine 45mm Rod Extension Kit","description":"\u003cp\u003eThe 45mm Extension rods attaches to the standard rods on your Tranquilizer\/Wire AVM, giving some extra space above or below the vibration mount.\u003c\/p\u003e\u003cp\u003eShips in a set of 4 rods.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559263802,"sku":"Blk-45mm-rod-ext","price":104.25,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/88912f0227c77cfc10ed306c2f435dc2.jpg?v=1714761321"},{"product_id":"flowcine-anti-vibration-mount-no-1","title":"Flowcine Anti Vibration Mount No.1","description":"\u003cp\u003e\nThe Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you have several camera\/gimbal rigs you may need several different anti-vibration mounts to handle the different weights.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eWIRE AVM WEIGHT RANGES:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559394874,"sku":"Blk-AVM-01","price":999.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/67b47c1cc4eb9cd4143ef06a5c739236.jpg?v=1714761325"},{"product_id":"flowcine-anti-vibration-mount-no-2","title":"Flowcine Anti Vibration Mount No.2","description":"\u003cp\u003eThe Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you have several camera\/gimbal rigs you may need several different anti-vibration mounts to handle the different weights.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eWIRE AVM WEIGHT RANGES:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559427642,"sku":"Blk-AVM-02","price":999.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/67b47c1cc4eb9cd4143ef06a5c739236_c8430813-908c-4f7a-ad3b-ff99bae9296c.jpg?v=1714761328"},{"product_id":"flowcine-anti-vibration-mount-no-3","title":"Flowcine Anti Vibration Mount No.3","description":"\u003cp\u003eThe Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you have several camera\/gimbal rigs you may need several different anti-vibration mounts to handle the different weights.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eWIRE AVM WEIGHT RANGES:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559493178,"sku":"Blk-AVM-03","price":999.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/67b47c1cc4eb9cd4143ef06a5c739236_a2170767-f312-43b4-857a-ce77921569ef.jpg?v=1714761331"},{"product_id":"flowcine-anti-vibration-mount-no-4","title":"Flowcine Anti Vibration Mount No.4","description":"\u003cp\u003eThe Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you have several camera\/gimbal rigs you may need several different anti-vibration mounts to handle the different weights.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eWIRE AVM WEIGHT RANGES:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559525946,"sku":"Blk-AVM-04","price":999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/67b47c1cc4eb9cd4143ef06a5c739236_33c92266-10ee-4384-a0cd-d8a3467dd416.jpg?v=1714761333"},{"product_id":"flowcine-anti-vibration-mount-no-5","title":"Flowcine Anti Vibration Mount No.5","description":"\u003cp\u003eThe Wire anti vibration mount (AVM) is a robust and easy to use AVM. You mount it to your Black, attach your rig, and you’re good to go. If you have several camera\/gimbal rigs you may need several different anti-vibration mounts to handle the different weights.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eWIRE AVM WEIGHT RANGES:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559558714,"sku":"Blk-AVM-05","price":999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/67b47c1cc4eb9cd4143ef06a5c739236_9784c0f8-b6c9-4c9a-8fae-7518b6f7e364.jpg?v=1714761336"},{"product_id":"flowcine-arm-post-high-low-mode-kit-pro-0-625","title":"Flowcine Arm post high\/low mode kit PRO 0.625\"","description":"\u003cp\u003eThis is the complete kit of the:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArm posts\u003c\/li\u003e\n\u003cli\u003eLow mode grip handle\u003c\/li\u003e\n\u003cli\u003eSuper-high\/low mode link bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.\u003c\/p\u003e\u003cp\u003e\n\n\u003cstrong\u003eNote: The Arm posts and post grips are only compatible with the xARM.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559755322,"sku":"x-HiLowKit-PRO","price":600.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/150cbe73b6c1c4d445a32aed5cc03987.jpg?v=1714761339"},{"product_id":"flowcine-arm-post-high-low-mode-kit-tiffen-0-51","title":"Flowcine Arm post high\/low mode kit Tiffen 0.51\"","description":"\u003cp\u003eThis is the complete kit of the:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArm posts\u003c\/li\u003e\n\u003cli\u003eLow mode grip handle\u003c\/li\u003e\n\u003cli\u003eSuper-high\/low mode link bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: The Arm posts and post grips are only compatible with the xARM.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559788090,"sku":"x-HiLowKit-Tiff-0.51","price":600.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/150cbe73b6c1c4d445a32aed5cc03987_582b8811-254f-4ffc-8624-40738b981e62.jpg?v=1714761341"},{"product_id":"flowcine-arm-post-high-low-mode-kit-tiffen-0-74","title":"Flowcine Arm post high\/low mode kit Tiffen 0.74\"","description":"\u003cp\u003eThis is the complete kit of the:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArm posts\u003c\/li\u003e\n\u003cli\u003eLow mode grip handle\u003c\/li\u003e\n\u003cli\u003eSuper-high\/low mode link bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: The Arm posts and post grips are only compatible with the xARM.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559853626,"sku":"x-HiLowKit-Tiff-0.74","price":625.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/150cbe73b6c1c4d445a32aed5cc03987_a69ca1aa-85ce-4301-a1d0-d5de161ddf1b.jpg?v=1714761344"},{"product_id":"flowcine-arm-posts-for-pro-0-625","title":"Flowcine Arm posts for PRO 0.625","description":"\u003cp\u003eThese telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two different arm posts lengths (265mm\/10.5″ and 165mm\/6.5″) and both are telescopic meaning the user can, with the two included arm post grips, position the perfect height of operation. For secure placement one grip is placed on the top and one on the bottom, preventing the arm post from sliding out in any direction. The two arm post allows for operation up to 203mm\/8″ and 103mm\/4″ above normal arm post height.\u003c\/p\u003e\u003cp\u003eThe post grips use M4 screw for locking (allen key already supplied in xARM case).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: Post grips and arm posts are only compatible with the xARM.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559951930,"sku":"x-ArmPost-Pro-0.625","price":292.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/bda963dc88aeaac04ddab17961c93413.jpg?v=1714761346"},{"product_id":"flowcine-arm-posts-for-tiffen-0-51","title":"Flowcine Arm posts for Tiffen 0.51\"","description":"\u003cp\u003eThese telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two different arm posts lengths (265mm\/10.5″ and 165mm\/6.5″) and both are telescopic meaning the user can, with the two included arm post grips, position the perfect height of operation. For secure placement one grip is placed on the top and one on the bottom, preventing the arm post from sliding out in any direction. The two arm post allows for operation up to 203mm\/8″ and 103mm\/4″ above normal arm post height.\u003c\/p\u003e\u003cp\u003eThe post grips use M4 screw for locking (allen key already supplied in xARM case).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: Post grips and arm posts are only compatible with the xARM.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456559984698,"sku":"x-ArmPost-Tiff-0.51","price":292.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/bda963dc88aeaac04ddab17961c93413_10622ab8-a94f-453c-89ee-d14c6b7fb3b4.jpg?v=1714761349"},{"product_id":"flowcine-arm-posts-for-tiffen-0-74","title":"Flowcine Arm posts for Tiffen 0.74\"","description":"\u003cp\u003eThese telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals. It comes with two different arm posts lengths (265mm\/10.5″ and 165mm\/6.5″) and both are telescopic meaning the user can, with the two included arm post grips, position the perfect height of operation. For secure placement one grip is placed on the top and one on the bottom, preventing the arm post from sliding out in any direction. The two arm post allows for operation up to 203mm\/8″ and 103mm\/4″ above normal arm post height.\u003c\/p\u003e\u003cp\u003eThe post grips use M4 screw for locking (allen key already supplied in xARM case).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: Post grips and arm posts are only compatible with the xARM.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560017466,"sku":"x-ArmPost-Tiff-0.74","price":292.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/bda963dc88aeaac04ddab17961c93413_7ce772f4-9547-4892-949a-92ad06e4e067.jpg?v=1714761353"},{"product_id":"flowcine-back-relief-pad","title":"Flowcine Back Relief Pad","description":"\u003cp\u003eThe xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the force between the upper, middle and lower trapezius muscles instead of just the upper parts. This new back relief pad gives a improved feeling in the back, due to the increased support area.\u003c\/p\u003e\u003cp\u003eIt’s designed to be added in seconds and it can be adjusted by unlocking the center back screw and sliding it up and down, placing it at the exactly right height according to your body size.\u003c\/p\u003e\u003cp\u003eThe back relief panel is made of carbon fiber and ships with two extra pad layer spacers and a soft 3d mesh foam pad. This allows you to have the correct pressure on your back by adding or removing the spacers.\u003c\/p\u003e\u003cp\u003eAdded weight, without spacer pads, is 180 grams (each extra spacer pad is 39 gram).\u003c\/p\u003e\u003cp\u003eIt works well for both front and back mounts.\u003c\/p\u003e\u003ch4\u003eMOUNTING AND ADJUSTMENTS\u003c\/h4\u003e\u003cp\u003eThe stainless steel lock, located at the back of the xSPINE back scull, is removed and replaced with a new dual lock. The Back relief CF plate is then able to slide onto this lock, and both position of back relief pad and back scull are locked simultaneously. The Back relief pad is fully removable without changing locks, if the user wants to wear the vest without it.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 pcs xSPINE CF back relief panel\u003c\/li\u003e\n\u003cli\u003e1 pcs xSPINE dual lock\u003c\/li\u003e\n\u003cli\u003e2 pcs xSPINE back relief pads\u003c\/li\u003e\n\u003cli\u003e1 pcs xSPINE upper back spacer pad\u003c\/li\u003e\n\u003cli\u003e1 pcs xSPINE back relief 3d mesh foam padding\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560083002,"sku":"x-Bck-relief","price":675.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/95ef6ce8af08ca0b48b4d9b981a88494.jpg?v=1714761356"},{"product_id":"flowcine-black-mitchell-nut-w-arri-thread","title":"Flowcine Black Mitchell Nut w\/ Arri Thread","description":"\u003cp\u003eThe Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.\u003c\/p\u003e\u003cp\u003eThe Black Mitchell Nut comes in two different thread standards. Either the more common 2 3\/4″-12UN (as we use in our Male Mitchell mount) or the Arri M70x2.0, for the SRH-3 head for example.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Black Mitchell Nut 2 3\/4″-12UN is included with our Male Mitchell mount.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560214074,"sku":"Blk-Mitch-Nut-Arri","price":175.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/7c46fedc3c98c34066f27d7d60a39553.jpg?v=1714761360"},{"product_id":"flowcine-black-pro-clamp-dual","title":"Flowcine Black Pro Clamp Dual","description":"\u003cp\u003e\nThe Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certified.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560345146,"sku":"Blk-ClampDual","price":95.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/bf4c40b2ba85d93b574320b40f6fc2bf.jpg?v=1714761369"},{"product_id":"flowcine-black-pro-clamp-single","title":"Flowcine Black Pro Clamp Single","description":"\u003cp\u003eThe Black Pro Clamp Single mounts on to standard pipes\/speed rail with 48-51mm diameter. It’s specified up to 500kg load and are German TUV certified.\u003c\/p\u003e\u003cp\u003eIt mounts on to the Universal Rack Flowcine edition, to be able to attach speed rail on to your tow bar.\u003c\/p\u003e\u003cp\u003eThe Black Pro Clamp Single ships with one of our T-nuts, for easy tightening by hand or with a 19mm wrench.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e  The Black Pro Clamp Single is sold one and one.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560377914,"sku":"Blk-ClampSingle","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/e913f95b622cce7f418be1a628e3e0c5.jpg?v=1714761372"},{"product_id":"flowcine-black-rigid-nose-mount","title":"Flowcine Black Rigid Nose Mount","description":"\u003cp\u003e\nThe  Rigid nose mount is an accessory for the times where you need to lock up the roll\/tilt movement for the Black arms head. Common use cases could be when the Black is mounted on to a motorcycle, and you want to keep the weight fixed to avoid unbalance while riding the bike.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560410682,"sku":"Blk-rigid-nose","price":415.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/d059b504737b6527c2c9a9daaaf89e2a.jpg?v=1714761376"},{"product_id":"flowcine-black-standard","title":"Flowcine Black Standard","description":"\u003ch4\u003eSTANDARD OR COMPLETE\u003c\/h4\u003e\u003cp\u003eThe Black Arm comes in two versions. The Black Arm Standard is made to work for gimbals and cameras with a weight range between 5-13kg (11-28lbs). The Black Arm Complete is for users working with higher loads and carries between 5-32kg (11-70lbs). Of course, you have the option to upgrade the Standard version into a Complete, if desired.\u003c\/p\u003e\u003cp\u003eThe Black Standard ships with one damper for each of the three axes, while the Black Complete ships with a total of six dampers, allowing for dual dampers on each axis if needed, or as spares.\u003c\/p\u003e\u003ch4\u003eANTI-VIBRATION MOUNT\u003c\/h4\u003e\u003cp\u003eEach Black Arm ships with one anti-vibration mount (AVM). The main purpose of the AVM is to reduce high-frequency vibrations, such as noise from a car’s engine. In order to maximize the full efficiency of the AVM, you should always use the correct version that matches your load and conditions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThere are two types of AVMs, the original Wire AVM and the new Tranquilizer.\u003c\/p\u003e\u003cp\u003eThe Wire AVMs come in five different weight ranges and are very easy to use.\u003c\/p\u003e\u003cp\u003eThe Tranquilizer has many adjustments to fine-tune its performance and may give better results if you have the time and skills to configure it properly.\u003c\/p\u003e\u003cp\u003eIt’s important that the system matches the total weight of your camera build (gimbal, camera and accessories) you will hang on to The Black Arm.\u003c\/p\u003e\u003ch4\u003e\n\u003cstrong\u003eWire AVM weight ranges:\u003c\/strong\u003e\n\u003c\/h4\u003e\u003cp\u003eThe Wire AVMs are available in five different weight ranges. Pick the one that best match your rigs total weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo.01 – 7-10 kg (15-22 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.02 – 10-14 kg (22-31 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.03 – 14-19 kg (31-42 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.04 – 19-26 kg (42-57 lbs)\u003c\/li\u003e\n\u003cli\u003eNo.05 – 26-34 kg (57-75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n*** Note: Tranquilizer is NOT included on Standard kit only your choice of one AVM.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560443450,"sku":"Blk-Std","price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/aa248dc8fec56f5d29c99743e22b1e21.jpg?v=1714761380"},{"product_id":"flowcine-g-link-gimbal","title":"Flowcine G-Link Gimbal","description":"\u003cp\u003eGimbal Part for G-Link \u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560476218,"sku":"GLK-SUB-GMB","price":430.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/ffee8fa52c945c1ecf702394f5846825.jpg?v=1714761384"},{"product_id":"flowcine-glink-max","title":"Flowcine GLINK - Max","description":"\u003cp\u003e\nThe GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greatest boom range on the market, the GLINK is able to reach an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement.\u003c\/p\u003e\u003ch4\u003eINTRODUCING THE GLINK\u003c\/h4\u003e\u003cp\u003eThe GLINK comes with a docking station that allows you to balance both your camera and gimbal in the system for effortless tilt motion and perfect balance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe GLINK can support all professional gimbal payloads with a lift range between 6 – 24.9kg (13 – 55.0lbs). The GLINK stabilization arms can be tuned via the GLINK spring cores so that the arms float in a close to horizontal position.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe GLINK can accommodate most popular electronic gimbals, such as the Freefly systems and the DJI Ronin 2, which can all be mounted directly to the GLINK. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe GLINK can also support electronic heads such as the ARRI Trinity, Betz Wave, and MK-V Omega. It can also support fixed camera rigs in handheld mode with a separate telescopic handheld unit mount.\u003c\/p\u003e\u003ch4\u003eSPRING CORES\u003c\/h4\u003e\u003cp\u003eThere are four different spring cores for the GLINK. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThey each have a different weight range, and you choose which spring to use based on the weight of your camera package and gimbal.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOrange: 6.0-11.0 KG – 13.0-24.0 LBS\u003c\/li\u003e\n\u003cli\u003eBlack: 10.0-15.5 KG – 22.0-34.0 LBS\u003c\/li\u003e\n\u003cli\u003eGray: 12.5-18.5 KG – 27.5-40.5 LBS\u003c\/li\u003e\n\u003cli\u003eBlue: 18.0-24.9 KG – 39.6-55.0 LBS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCUSTOM FIT\u003c\/h4\u003e\u003cp\u003eThe retraction brackets (fore and aft gimbal positioning) section can be adjusted up and down along the xSPINE dovetail for lower or higher shots. The adjustable socket blocks on the retraction brackets can also be telescopically extended in width to adjust clearance from the sides of your body according to your body size.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe socket blocks can be adjusted around tilt to adjust fore and aft position, allowing the gimbal\/camera to stay in a given position from the operator’s body.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560508986,"sku":"g-GLINK-Max","price":17980.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b8e00d51f0b7bf0560986fd2358e816c.jpg?v=1714761387"},{"product_id":"flowcine-glink-max-no-vest","title":"Flowcine GLINK - Max (No Vest)","description":"\u003cp\u003e\nThe GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greatest boom range on the market, the GLINK is able to reach an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560541754,"sku":"g-GLINK-Max-NoVest","price":8835.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b8e00d51f0b7bf0560986fd2358e816c_c00447e3-d965-43a6-bc2e-a0eb03486a3e.jpg?v=1714761393"},{"product_id":"flowcine-glink-medium","title":"Flowcine GLINK - Medium","description":"\u003cp\u003e\nThe GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greatest boom range on the market, the GLINK is able to reach an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement.\u003c\/p\u003e\u003cp\u003eMedium: Pick two springs\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560574522,"sku":"g-GLINK-Med","price":14260.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b8e00d51f0b7bf0560986fd2358e816c_4097b576-82fb-4f38-9521-2c69fe5421a8.jpg?v=1714761398"},{"product_id":"flowcine-glink-minimal","title":"Flowcine GLINK - Minimal","description":"\u003cp\u003e\nThe GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support. With the greatest boom range on the market, the GLINK is able to reach an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement. \u003c\/p\u003e\u003ch4\u003e\nMinimal: Pick one spring\n\n\u003cbr\u003e\n\u003c\/h4\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560607290,"sku":"g-GLINK-Min","price":12365.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b8e00d51f0b7bf0560986fd2358e816c_76cb59a8-337d-4001-893b-a30c3e10b812.jpg?v=1714761404"},{"product_id":"flowcine-glink-cf-ring-bottom-part","title":"Flowcine GLINK CF Ring (bottom part)","description":"\u003cp\u003e\nThe bottom frame is needed if you’d like to work without the GLINK Docking Station, or if you need to mount your gimbal over slung.\n\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight: 240 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 480 mm\u003c\/li\u003e\n\u003cli\u003eDepth: 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 350 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560640058,"sku":"g-CFRing-Bottom","price":355.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/a7a11b0e3a616eebb244164345131431.jpg?v=1714761410"},{"product_id":"flowcine-glink-cf-ring-full-ring","title":"Flowcine GLINK CF Ring (full ring)","description":"\u003cp\u003e\nThe full ring is a kit with both the top and bottom frame.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight: 640 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 480 mm\u003c\/li\u003e\n\u003cli\u003eDepth: 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 690 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560672826,"sku":"g-CFRing","price":711.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/5fde0e772278e2d81f4105d0d3cecb21.jpg?v=1714761413"},{"product_id":"flowcine-glink-cf-ring-top-part","title":"Flowcine GLINK CF Ring (top part)","description":"\u003cp\u003e\nThe top frame is where you’d normally attach your gimbal. It can work without the bottom frame, if you plan to dock it in the GLINK Docking Station.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight: 400 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 480 mm\u003c\/li\u003e\n\u003cli\u003eDepth: 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 340 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456560705594,"sku":"g-CFRing-Top","price":355.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/2586bf72ff3d9850be1838b8dde852fe.jpg?v=1714761415"},{"product_id":"flowcine-glink-docking-stand","title":"Flowcine GLINK Docking Station","description":"\u003cp\u003eThe GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set. The main functions for the Docking Station are broken down into three important parts:\u003c\/p\u003e\u003cp\u003e1. Compact and secure docking of your GLINK CF Ring, gimbal\/camera setup and GLINK stabilization arms etc. The U-shape of the docking bracket allows any type of camera build to be docked with the CF Ring without collision problems. Since the total docking stand is mounted on a baby pin, it allows you to clear space on your camera cart for other things. If adding the Docking Station Tool Rack, sold separately, the docking stand can also carry all tools needed for adjustments etc.\u003c\/p\u003e\u003cp\u003e2. Allow accurate axis-by-axis type of balancing and guided gimbal docking. Together with the tilt swivel function of the GLINK gimbal handles and the Docking Station CF frame locks, the user can easily fine tune gimbal balance and overall balance of the  unit in separate stages. The docking stand is designed to make all kinds of balancing steps as quick and easy as possible, as the gimbal can be tilted in any direction. This allows to easily check the roll and pan balance of the gimbal unit as well. The Docking Station also has guide brackets next to the gimbal nest for the GLINK gimbal handles, making docking\/undocking the GLINK arm post easy both over and under slung.\u003c\/p\u003e\u003cp\u003e3. Travel size friendly. The Docking Station is fully collapsible which means less space when traveling. Protective corner brackets makes the stand solid, and at the same time protects it well on set.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 pcs horizontal GLINK Docking Station bar incl. two arm hanger pins\u003c\/li\u003e\n\u003cli\u003e2 pcs vertical GLINK Docking Station bars CF frame locks\u003c\/li\u003e\n\u003cli\u003e2 pcs GLINK Docking Station corner brackets\u003c\/li\u003e\n\u003cli\u003e1 pcs Tool rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561000506,"sku":"g-Dock","price":711.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b85984153bfe4540aa39be7f2f755512.jpg?v=1714761418"},{"product_id":"flowcine-glink-foot-for-cf-ring-1-pcs","title":"Flowcine GLINK Foot for CF Ring (1 pcs)","description":"\u003cp\u003eThe GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible on either side of the CF bottom to act as a sturdy and well balanced stand for the gimbal\/camera package. The CF Ring Foot has both ¼”-20 UNC and ⅜”-16 UNC treads for being able to mount various accessories such as monitors etc.\u003c\/p\u003e\u003ch4\u003eMOUNTING OPTIONS\u003c\/h4\u003e\u003cp\u003eThe foot clamps onto the octagonal CF Ring, using a quick lever knob. The foot can be mounted straight or be mounted at downward pointing angle, if using more than two feet, to create a gimbal stand in uneven terrain.\u003c\/p\u003e\u003cp\u003eEach foot is equipped with 2x ¼”-20 UNC and 3x ⅜”-16 UNC threads with anti-rotation grooves.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561066042,"sku":"g-Foot-1","price":87.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/f7f2f244fb52dbc49662129c3ea0767d.jpg?v=1714761428"},{"product_id":"flowcine-glink-foot-for-cf-ring-2-pcs","title":"Flowcine GLINK Foot for CF Ring (2 pcs)","description":"\u003cp\u003eThe GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible on either side of the CF bottom to act as a sturdy and well balanced stand for the gimbal\/camera package. The CF Ring Foot has both ¼”-20 UNC and ⅜”-16 UNC treads for being able to mount various accessories such as monitors etc.\u003c\/p\u003e\u003ch4\u003eMOUNTING OPTIONS\u003c\/h4\u003e\u003cp\u003eThe foot clamps onto the octagonal CF Ring, using a quick lever knob. The foot can be mounted straight or be mounted at downward pointing angle, if using more than two feet, to create a gimbal stand in uneven terrain.\u003c\/p\u003e\u003cp\u003eEach foot is equipped with 2x ¼”-20 UNC and 3x ⅜”-16 UNC threads with anti-rotation grooves.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561164346,"sku":"g-Foot-2","price":158.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/f7f2f244fb52dbc49662129c3ea0767d_7fcecd14-afe3-42e2-8158-8e6fa39351ab.jpg?v=1714761431"},{"product_id":"flowcine-glink-foot-for-cf-ring-3-pcs","title":"Flowcine GLINK Foot for CF Ring (3 pcs)","description":"\u003cp\u003eThe GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring. The feet are mounted as wide as possible on either side of the CF bottom to act as a sturdy and well balanced stand for the gimbal\/camera package. The CF Ring Foot has both ¼”-20 UNC and ⅜”-16 UNC treads for being able to mount various accessories such as monitors etc.\u003c\/p\u003e\u003ch4\u003eMOUNTING OPTIONS\u003c\/h4\u003e\u003cp\u003eThe foot clamps onto the octagonal CF Ring, using a quick lever knob. The foot can be mounted straight or be mounted at downward pointing angle, if using more than two feet, to create a gimbal stand in uneven terrain.\u003c\/p\u003e\u003cp\u003eEach foot is equipped with 2x ¼”-20 UNC and 3x ⅜”-16 UNC threads with anti-rotation grooves.\u003c\/p\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561393722,"sku":"g-Foot-3","price":230.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/645b92162d05795ea6aa5faf550cedba.jpg?v=1714761435"},{"product_id":"flowcine-glink-handheld-mount","title":"Flowcine GLINK Handheld Mount","description":"\u003cp\u003eThe GLINK handheld mount is a telescopic mount for either hard mounted cameras and\/or electronic heads such as the ARRI Trinity,  MK-V Omega\/AR or the Betz Wave. The connection plate has various ¼”-20 UNC and ⅜”-16 UNC mounting threads and slots for mounting various cameras, dovetails or other plates etc. This allows hybrid handheld style of shooting, with stabilized vertical motion through the GLINK stabilization arms together with dual 3-axis gimbal rotational motion compensation allowing all kinds of shooting styles.\u003c\/p\u003e\u003ch4\u003eMOUNTING OPTIONS\u003c\/h4\u003e\u003cp\u003eThe GLINK hand held mount is mounted directly on top of the GLINK CF Ring. The hand held mount fits without the need to remove the MoVI\/R2 mount (the dovetail needs to be removed though) saving time on set when using this option. The hand held mount can be adjusted up and down to find perfect tilt balance in the system. Maximum mounting width on the system is 420mm \/ 16.5”. The connection plate has 18×1\/4”-20 UNC thread, 12×3\/8”-16 UNC threads, 6×1\/4” slots and 2 x ⅜” ones.\u003c\/p\u003e\u003ch4\u003eADJUSTMENTS\u003c\/h4\u003e\u003cp\u003eThe GLINK hand held mount can be adjusted side to side across the full length of the Ring top frame, and the connection plate has a 125mm \/ 5” of telescopic travel height adjustment.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 pcs GLINK handheld clamps\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK handheld mount\u003c\/li\u003e\n\u003cli\u003e2 pcs GLINK handheld mounting brackets\u003c\/li\u003e\n\u003cli\u003e2 pcs ⅜”-16 UNC countersunk screws\u003c\/li\u003e\n\u003cli\u003e2 pcs ⅜”-16 x5\/8” UNC Mushroom head mounting screws\u003c\/li\u003e\n\u003cli\u003e2 pcs ¼”-20 x5\/8” UNC Mushroom head mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561459258,"sku":"g-Handheld","price":535.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/7bce8495a5bfe629f5cbc7c9a031171c.jpg?v=1714761438"},{"product_id":"flowcine-glink-hard-case","title":"Flowcine GLINK Hard case","description":"\u003cp\u003eThe GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle bar for lightweight and trouble free packing of the GLINK system.\u003c\/p\u003e\u003cp\u003eThe GLINK Case allows storage of the main units such as the CF Ring, Docking Station, Retraction brackets and all accessories in a logical and manageable layout. The GLINK Case has space for the following equipment:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 pcs GLINK CF Ring Top part with two gimbal handles attached and the MoVI \/ R2 mount.\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK CF Ring Bottom part\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK Docking Station\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK Hand held mount\u003c\/li\u003e\n\u003cli\u003e2 pcs GLINK Stabilization arms\u003c\/li\u003e\n\u003cli\u003e2 pcs GLINK Retraction bracket arms (left \/ right)\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK xSPINE mount\u003c\/li\u003e\n\u003cli\u003e6 pcs separate GLINK Spring cores\u003c\/li\u003e\n\u003cli\u003e3 pcs Allen key tools\u003c\/li\u003e\n\u003cli\u003e3 pcs CF Ring Feet\u003c\/li\u003e\n\u003cli\u003e4 pcs CF Ring Monitor clamps\u003c\/li\u003e\n\u003cli\u003e2 pcs GLINK Arm posts\u003c\/li\u003e\n\u003cli\u003e4 pcs GLINK Arm post clamps\u003c\/li\u003e\n\u003cli\u003eVarious small compartments for spare screws etc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMEASUREMENTS\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eExterior (L×W×D):\u003c\/strong\u003e26.61 x 20.65 x 14.87 in\u003c\/p\u003e\u003cp\u003e67.6 x 52.5 x 37.8 cm\u003cstrong\u003eWeight:\u003c\/strong\u003e 10800 g \/ 23.81 lbs\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561492026,"sku":"g-Case","price":940.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/f6303a2f7689d7ed4857932ba86b88ca.jpg?v=1714761442"},{"product_id":"flowcine-glink-monitor-clamp-for-cf-ring","title":"Flowcine GLINK Monitor clamp for CF Ring","description":"\u003cp\u003e\nThe GLINK Monitor clamp for CF ring lets the operator quickly add extra mounting points for monitors or other accessories. The monitor clamp is quickly mounted with a quick lever knob, and has both a ¼”-20 UNC and ⅜”-16 UNC thread for being able to mount any type of standard cinema equipment accessory.\u003c\/p\u003e\u003cp\u003eIt clamps onto the octagonal CF Ring, using a quick lever knob.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561623098,"sku":"g-MonClamp","price":72.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/68487c35fc0c398307b88700395c34f1.jpg?v=1714761448"},{"product_id":"flowcine-glink-spring-core-black-pair","title":"Flowcine GLINK Spring core - Black (pair)","description":"\u003cp\u003eThe GLINK Spring cores are based on the same type of polymer spring technology Flowcine developed for the xARM. The polymer spring cores are made with an outer shell of Neoprene and each core has a smooth and linear lifting capacity. When being used near their maximum lifting capacity, they perform their best, thus each set of spring cores has a weight range of about 5 Kg \/ 11 Lbs, allowing the gimbal operator to fine tune the arm to optimal performance. The spring cores are pre-extended and can quickly be changed on set. The GLINK Spring cores, when tuned correctly, are incredibly smooth and need just a minimal force to maintain any position.\u003c\/p\u003e\u003ch4\u003eAVAILABLE SPRING CORE VARIANTS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOrange: 6.0-11.0 KG – 13.0-24.0 LBS\u003c\/li\u003e\n\u003cli\u003eBlack: 10.0-15.5 KG – 22.0-34.0 LBS\u003c\/li\u003e\n\u003cli\u003eGrey: 12.5-18.5 KG – 27.5-40.5 LBS\u003c\/li\u003e\n\u003cli\u003eBlue: 18.0-24.9 KG – 39.6-55.0 LBS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eADJUSTMENTS\u003c\/h4\u003e\u003cp\u003eThe GLINK Spring cores have tool-less fine tuning of the lift by adjusting a knob residing at the bottom side.\u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003c\/i\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You need a GLINK v1.5 to use the blue spring cores.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561655866,"sku":"g-Spring-Blk","price":395.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/3a796605701c2992bd574991999a734d.jpg?v=1714761451"},{"product_id":"flowcine-glink-toolrack","title":"Flowcine GLINK Toolrack","description":"\u003cp\u003e\nThe GLINK Docking Station Tool rack allows a user to be able to mount allen key tools directly on the docking station. The tool rack is designed to be used both with imperial and metric tools and has the following diameters for inserting allen tools: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561688634,"sku":"g-ToolRack","price":95.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/12bd2c56a4528c37d52ba7de8600c65a.jpg?v=1714761454"},{"product_id":"flowcine-low-mode-grip-handle-for-tiffen-0-74","title":"Flowcine Low Mode Grip Handle for Tiffen 0.74\"","description":"\u003cp\u003eThe low mode grip handle allows for more comfortable hand placement for the operators control hand when working in low mode. Instead of controlling the gimbal handle, the operator have the option to have better reach and control using this grip handle. The grip handle has multiple 3\/8″ and 1\/4″ threads to allow any type of accessory mounting such as monitors \/ zoom or focus rocker \/ articulated arms etc.\u003c\/p\u003e\u003cp\u003eThe handle bar is equipped with 24 x 3\/8″-16 UNC threads (18 x with anti-twist feature (ARRI accessory mount)) and 20 x 1\/4″-20 UNC.\u003c\/p\u003e\u003cp\u003eThe Low mode grip handle works not only with the xARM arm posts, but also with PROs 0.625″ and Tiffens 0.74″ and 0.51″ arm posts.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 x Grip handle bar with 44 x UNC threads\u003c\/li\u003e\n\u003cli\u003e1 x Arm post handle bar mount\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to Tiffen 0.51″ arm post adapter (only included in the Tiffen 0.51″ version of the grip handle)\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to PRO arm post adapter (only included in the PRO version of the grip handle)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456561819706,"sku":"x-grpHandle-Tiff-0.74","price":215.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/8b8d49d2ae52dcac3a4d8ae48dc11757.jpg?v=1714761458"},{"product_id":"flowcine-low-mode-grip-handle-for-pro-0-625","title":"Flowcine Low mode grip handle for PRO 0.625\"","description":"\u003cp\u003eThe low mode grip handle allows for more comfortable hand placement for the operators control hand when working in low mode. Instead of controlling the gimbal handle, the operator have the option to have better reach and control using this grip handle. The grip handle has multiple 3\/8″ and 1\/4″ threads to allow any type of accessory mounting such as monitors \/ zoom or focus rocker \/ articulated arms etc.\u003c\/p\u003e\u003cp\u003eThe handle bar is equipped with 24 x 3\/8″-16 UNC threads (18 x with anti-twist feature (ARRI accessory mount)) and 20 x 1\/4″-20 UNC.\u003c\/p\u003e\u003cp\u003eThe Low mode grip handle works not only with the xARM arm posts, but also with PROs 0.625″ and Tiffens 0.74″ and 0.51″ arm posts.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 x Grip handle bar with 44 x UNC threads\u003c\/li\u003e\n\u003cli\u003e1 x Arm post handle bar mount\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to Tiffen 0.51″ arm post adapter (only included in the Tiffen 0.51″ version of the grip handle)\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to PRO arm post adapter (only included in the PRO version of the grip handle)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562016314,"sku":"x-grpHandle-PRO","price":259.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/8b8d49d2ae52dcac3a4d8ae48dc11757_7a42392d-446e-4048-908b-b7e1fad0a41c.jpg?v=1714761461"},{"product_id":"flowcine-low-mode-grip-handle-for-tiffen-0-51","title":"Flowcine Low mode grip handle for Tiffen 0.51\"","description":"\u003cp\u003eThe low mode grip handle allows for more comfortable hand placement for the operators control hand when working in low mode. Instead of controlling the gimbal handle, the operator have the option to have better reach and control using this grip handle. The grip handle has multiple 3\/8″ and 1\/4″ threads to allow any type of accessory mounting such as monitors \/ zoom or focus rocker \/ articulated arms etc.\u003c\/p\u003e\u003cp\u003eThe handle bar is equipped with 24 x 3\/8″-16 UNC threads (18 x with anti-twist feature (ARRI accessory mount)) and 20 x 1\/4″-20 UNC.\u003c\/p\u003e\u003cp\u003eThe Low mode grip handle works not only with the xARM arm posts, but also with PROs 0.625″ and Tiffens 0.74″ and 0.51″ arm posts.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 x Grip handle bar with 44 x UNC threads\u003c\/li\u003e\n\u003cli\u003e1 x Arm post handle bar mount\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to Tiffen 0.51″ arm post adapter (only included in the Tiffen 0.51″ version of the grip handle)\u003c\/li\u003e\n\u003cli\u003e1 x Tiffen 0.74″ to PRO arm post adapter (only included in the PRO version of the grip handle)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562049082,"sku":"x-grpHandle-Tiff-0.51","price":215.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/8b8d49d2ae52dcac3a4d8ae48dc11757_da837529-8c0b-45f4-b51a-94a1fd79f969.jpg?v=1714761463"},{"product_id":"flowcine-mitchell-female-mount","title":"Flowcine Mitchell Plate","description":"\u003cp\u003e\nThe Female Mitchell mount attaches right on to the Mitchell plate of the Black arm. It allows mounting of any standard Male Mitchell mount attached to your gimbal or remote head.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562114618,"sku":"Blk-Mitch","price":159.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/52411cace023d5b017bbb184aa294ac0_3fc17510-5629-4df2-af19-db817cd48738.jpg?v=1714761466"},{"product_id":"flowcine-mitchell-male-mount","title":"Flowcine Mitchell Male Mount","description":"\u003cp\u003e\nThe Male Mitchell mount is the perfect fit for mounting your gimbal or remote head on to our Female Mitchell mount. It ships with one of our Mitchell nuts, which is designed to easily slip between the rods in our Female Mitchell mount.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562147386,"sku":"Blk-Mitch-Male","price":645.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/b16c866d239777b8345a721e31d4b6f2.jpg?v=1714761469"},{"product_id":"flowcine-mitchell-male-to-50mm-boom-adapter","title":"Flowcine Mitchell Male to 50mm Boom Adapter","description":"\u003cp\u003e\nThe Male Mitchell mount is the perfect fit for mounting your gimbal or remote head on to our Female Mitchell mount. It ships with one of our Mitchell nuts, which is designed to easily slip between the rods in our Female Mitchell mount.\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562180154,"sku":"Blk-MitchMale-Boom","price":699.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/70e8cf244da3bfbc59569cec6272e2c7.jpg?v=1714761472"},{"product_id":"flowcine-mitchell-nut","title":"Flowcine Mitchell Nut","description":"\u003cp\u003eThe Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.\u003c\/p\u003e\u003cp\u003eThe Black Mitchell Nut comes in two different thread standards. Either the more common 2 3\/4″-12UN (as we use in our Male Mitchell mount) or the Arri M70x2.0, for the SRH-3 head for example.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Black Mitchell Nut 2 3\/4″-12UN is included with our Male Mitchell mount.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\n\n\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562343994,"sku":"Blk-Mitch-Nut","price":175.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/7c46fedc3c98c34066f27d7d60a39553_600a4ccd-064d-4879-bd48-9c2266709cc2.jpg?v=1714761476"},{"product_id":"flowcine-mitchell-boom-for-xmount","title":"Flowcine xMOUNT Mitchell Adapter","description":"\u003cp\u003eThe xMOUNT Mitchell adapter is a 50mm tube adapter, that is made with the exact height of the xMOUNT to allow a small and tight package that can be mounted on standard female mitchell. The xMOUNT Mitchell adaptor comes with a stainless steel 2-¾” UN Mitchell nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The xMOUNT Mitchell adapter comes in foam\/box that is fitted for a Pelican Storm Case iM2075. The foam is prepared to be transferred into a case (not included) if needed.\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 x xMOUNT Mitchell adapter\u003c\/li\u003e\n\u003cli\u003e1 x Stainless steel 2-¾” UN Mitchell nut\u003c\/li\u003e\n\u003cli\u003eMitchell adapter custom foam that fits inside a iM2075 Pelican Storm Case\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562376762,"sku":"x-Mitchell-xMnt","price":615.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/3b95517039e1ab5f97b173086196b1f1.jpg?v=1714761479"},{"product_id":"flowcine-movi-r2-mount","title":"Flowcine Movi R2 Mount","description":"\u003cp\u003eThe GLINK MoVI R2 Mount is made to allow you to fine tune the balance around tilt on your gimbal unit. The mount comes with a GLINK dovetail that allows you to mount either a Freefly systems male “toad in the hole” (TITH) or a DJI Ronin 2 mounting base. The top clamp unit on the MoVI R2 Mount allows the user to connect additional accessories such as monitor or top handle.\u003c\/p\u003e\u003ch4\u003eMOUNTING OPTIONS\u003c\/h4\u003e\u003cp\u003eThe GLINK MoVI R2 Mount is mounted with 4xM4 screws centered on the GLINK CF Ring Top frame. The dovetail allows mounting with either 4xM3 screws, or 4xM4 depending on mount (screws are included). The user can choose to mount the corresponding part either centered at the dovetail or at either end (makes it easier if the user has a huge offset in forward\/aft balance on the gimbal unit itself). The top clamp unit has 2×3\/8”-16 UNC threads with anti-rotational pin grooves as well as 4xM3 thread pattern to allow MoVI Classic top handle to be mounted.\u003c\/p\u003e\u003ch4\u003eADJUSTMENTS\u003c\/h4\u003e\u003cp\u003eThe GLINK MoVI R2 Mount can be adjusted side to side on top of the GLINK CF Ring Top frame. The unit can be mounted reversed as well for special types of shots (facing outwards).\u003c\/p\u003e\u003ch4\u003eINCLUDED IN THE BOX\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 pcs GLINK TITH\/R2 bridge plate mount\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK TITH\/R2 top clamp mount\u003c\/li\u003e\n\u003cli\u003e1 pcs GLINK TITH\/R2 dovetail\u003c\/li\u003e\n\u003cli\u003e4 pcs M4x16 Socket head cap screws\u003c\/li\u003e\n\u003cli\u003e4 pcs M4x20 Socket head cap screws\u003c\/li\u003e\n\u003cli\u003e4 pcs M3x12 Socket head cap screws\u003c\/li\u003e\n\u003cli\u003e4 pcs M3x10 Socket head cap screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n\n\u003cbr\u003e\u003c\/p\u003e","brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562409530,"sku":"g-TITH-R2","price":335.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/7d21917983e7a6e5bf1fb02a2f0327eb.jpg?v=1714761483"},{"product_id":"flowcine-peli-storm-case-im2075-for-xmount","title":"Flowcine Peli Storm Case iM2075 for xMOUNT","description":null,"brand":"Flowcine","offers":[{"title":"Default Title","offer_id":40456562475066,"sku":"iM2075","price":150.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/files\/0106e8e1e624db0222f23c4e51b9b232.jpg?v=1714761489"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/6960\/3898\/collections\/ce85f558fbcf0de2527c417498cde763.jpg?v=1729801157","url":"https:\/\/llsr.com\/collections\/camera-stabilization\/brand_ready-rig.oembed","provider":"Lorne Lapham Sales and Rentals","version":"1.0","type":"link"}